The worlds first trailer mounted boat cover stow and deploy mechanism that actually works! No more climbing in and out of your boat struggling with the cover. With the Cover Carry the cover is always stowed on the trailer or its on the boat where it belongs.
Uses Your Cover
Cover Stays with the Trailer
Single Person Stow and Deploy
Easy Install, No Mods to Trailer or Cover
How it works
01
Stow
- Remove stern end of cover from boat and clamp to the spindle port and starboard.
- Activate switch to wind up cover onto spindle. Spindle will 'climb' to the bow of boat
- Detach bow portion of cover from boat and wind up full onto the spindle.
- Stowed!
02
Deploy
- Unwind the cover enough to allow the bow portion of cover to be located over the bow.
- Walk the arm back toward stern while unwinding the cover from spindle.
- Disengage the port and starboard clamps to release the cover from spindle.
- Cover is free from spindle, now attach the cover to boat as per normal
03
Travel
- Position toward arm / spindle assembly to the full stern position and engage the arm locks for travel.
04
Variable Positioning
- Position the arm/spindle assy in any position between full bow and full stern and engaged the arm locks to hold in location.